|
Referancer: Motorola, Nokia, Honeywell, Segem, Sankyo, Nortel, Teac, Leica Siemens, Nissan
|
|
 |
|
Membrane
Switch |
Standard 12 Keys,16Keys,20Keys
Mylar Dome And Metal Dome Both Are Available
Special Design For EMI, RFI. or ESD Shielding
Raised Key With Mylar or Metal Tactile Effect
S.M.D. Components on Mylar Circuit or Connector for Tail
termination |
|
| |
 |
|
Flexible PCB
|
Flex-Rigid Board
Multi-Layer Flex PCB
Single-Side Flexible PCB
Double-Side Flexible PCB
S.M.D. Components on PCB
UL E 156389 & E 200944 |
|
| |
|
|
Touch
Panel |
|
Analog 4 wire & 5 wire type |
|
Matrix type |
|
| |
 |
|
Silicone Rubber Keypad |
Regular Keypad
Multi-Color Keypad
Complete Set - F.P.C. + LED +Keypad
Complete Set - Mylar Circuit + LED + Keypad
Complete Set - P.C.B. + Keypad + Components |
|
| |
|
STANDARD
PRODUCTS |
 |
Standard 12 Keys, 16Keys,
20Keys Are No Tooling Charge Necessary
|
|
|
Mylar Dome And Metal Dome
Both Are Available
|
|
|
Special Design For EMI, RFI
or ESD Shielding
|
|
|
Raised Key With Mylar or
Metal Tactile Effect
|
|
|
S.M.D. Components on Mylar
Circuit or Connector for Tail Termination
|
|
|
SPECIFICATIONS |
|
|
Operation Voltage
..............................................................<
35 vdc
|
|
|
Operation Current
.............................................................<
100 ma
|
|
|
Contact Resistance.....................
......................................< 100 ohms
|
|
|
Open Circuit Resistance
...................................................< 10
meg ohms
|
|
|
Operation
Force...................................................................<
30g to 500g
|
|
|
Operation
Temperature.......................................................<
-35C to +70C
|
|
|
Storage
Temperature...........................................................<
-45C to +90C
|
|
|
Life
Expectancy......................................................................< 5x105 to 3x107 cycles
|
|
|
Switch
Stroke.........................................................................<
0.1 -0.6 mm
|
|
|
Contact
bounce.....................................................................<
5 -30 msec
|
|
| |
R & D
GENERAL STATEMENT
We set up the Engineering Department as one of the most essential
programs
before mass production , which determines throughout all
manufacturing
techniques in processes of the production, and it's important as a
known motto
"QUALITY is procured by good Design & Manufacture, rather than by
Inspection"
ORGANIZATION
1. Samples Making Section.
2. Production Engineering Section.
3. Research & Development Section
TASK
1 Samples Making Section.
1.1 Engineering analysis
Experienced and skillful technicians will analyze materials,
drawings,
Specs., constructure... etc. information from Sales Dept., to design
the
proper tools and fixture for product requirements.
Make revised suggestions to customer when there are potential
quality problems in original drawings or Specs. that may occur in
mass
production.
1.2 Samples making & Reliability test
Provide fastest sample production and follow up Physical,
Environmental
, Life... (optional) tests to make sure the products are safe and
reliable in
properties.
1.3 Establish STANDARD OPERATING PROCEDURE for Manu. Dept.
1.4 Specify INSPECTION STANDARD that customer demands for Q.A.
2 Production Engineering Section
2.1 Usually station in Manu. Dept. to instruct professional skill
for operators
to avoid mistakes, or to solve quality problem during mass
production.
2.2 Improve operation process to be more efficient, and feedback
practical
situations for Samples Making Sec. or R&D Sec.
3 Research & Development Section
3.1 Research new materials or new manufacturing methods for existent
products.
3.2 Research new technology & develop new product, and trial run its
manufacturing process. |
 |
| |
We satisfy customers' requirement wit best quality and service !
QUALITY COMING FROM WELL DESIGN
For the Hardware Software, Mechanism, Tooling ,Pressing and
Electronic manufacturing personnel in R&D department, MKS have well
experience about those.
All manufacturers of Assembly in Taiwan now are are still staying on
the understanding that quality is coming from Inspection in process
,MKS has already entered into the stage that the quality comes from
the well design through the selection of supplier, certification of
material, well planning of process design and quality
control,....etc. We are continuously improving and refining our
practices to construct a better product. We maintain a comprehensive
defect data system for all production areas. This allows us to avoid
mistakes and to account for new problems that arise. 　
PRODUCT QUALITY AND TRACEABILITY
1. Manufacturing processes are documented and controlled through
manufacturing assembly procedures
2. Quality records for electrical test and final assembly test are
identified to part
number and lot
3. Product labeling typically includes part number, revision, date
code and
regulatory information.
4. Quantifiable color matching and color controls via
spectrophotometer.
QUALIFICATION
1. ISO 9000
2. QS9000
3. UL
|
| |
 |
|